月沙工具箱
現在位置:月沙工具箱 > 學習工具 > 英語單詞大全

air conditioning load是什麼意思,air conditioning load的意思翻譯、用法、同義詞、例句

輸入單詞

常用詞典

  • 空調負荷;空氣第負荷

  • 例句

  • Considers that it is not advisable to meet the seasonal and unstable air conditioning load by merely increasing capability of electric generation.

    認為完全靠增加發電能力來滿足季節性的和不穩定的空調負荷并非明智的辦法。

  • The calculation and design procedures of air conditioning load, ground loop heat exchangers, radiant floor system, distribution system between heat pump and build are mainly introduced.

    重點介紹了建築空調負荷計算、地下埋管換熱器系統、輻射地闆系統以及熱泵和建築物内分配系統設計等方面的内容。

  • These optimum programs can be meaningful in future application of Neural Network of air conditioning load prediction.

    該優化結果對今後開展利用神經網絡的空調負荷預測工作有一定的參考作用。

  • The air conditioning load calculation formula obtained can be applied to engineering calculation, and it is of engineering and theory …

    計算得出的空調負荷計算公式可以應用于工程計算,有一定的工程意義和理論應用價值。

  • Air conditioning system is the main factor of influence in building energy and building air conditioning load determine the energy consumption and building investment of air conditioning system.

    空調系統是影響建築能耗最大的因素,而建築空調負荷決定了空調系統的能耗及建設投資。

  • Obtains three types of relationship between supply air and fresh air by analyzing annual air conditioning load.

    通過全年空調負荷分析确定了送風狀态與新風狀态的三種對應關系。

  • Compared with normal buildings, BIPV/T reduces the air conditioning load caused by indoor heat gain through the wall and improves building energy efficiency.

    與常規建築相比,光伏光熱建築減少了牆體得熱,改善了室内空調負荷狀況,提高了建築節能效果。

  • The influences of the air conditioning load on the daily load characteristics in Central China Power Grid (CCPG) are analyzed by the with and without comparison method.

    本文采用有無對比分析法,對華中電網降溫采暖負荷對華中電網日負荷特性的影響進行了定量分析。

  • In order to exam the facility, the air conditioning load, air distribution, hydraulic of air duct and water pipe should be calculated.

    設計計算了建築負荷,氣流組織,風管水管的阻力等等,校核所選設備是否滿足要求。

  • Due to the air conditioning load demand is the dynamic change, in order to avoid the big flow, small load, variable flow applied widely.

    由于空調負荷需求是動态變化的,為避免出現“大流量、小負荷”的情況,變流量空調的應用日益廣泛。

  • When computing the lamination air conditioning load, to determine the indoor personnel shoulder according to the average booking rate value is economical.

    得出進行分層空調負荷計算時,按照平均上座率值來确定室内人員負荷經濟性較好。

  • Choose a typical high-rise office building in Wuhan as research object, hourly variety rules on typical day of air conditioning load is explored.

    選擇武漢市某一典型高層辦公樓為研究對象,探索空調負荷設計日逐時變化規律。

  • Design elements include: air conditioning load calculation;

    設計内容包括:空調負荷的計算;

  • At the same time use insulation membrane can reduce air conditioning load and cost;

    同時使用保溫膜可以降低空調負荷及成本;

  • Influence of Low-e glass on air conditioning load and building energy consumption;

    建築空調能耗的急劇增加對城市熱島效應的形成起到了極大的作用。

  • The utility model has the high smoke evacuation efficiency, can reduce the heat dissipation, decrease the air conditioning load, achieve the energy-saving, and the assembly is convenient;

    本實用新型排煙效率高,可以減少散熱,降低空調負 荷,實現節能,且施工安裝方便;

  • Furthermore, as the development of the building energy consumption analysis technology, people commence to consider other factors that affect the air-conditioning load.

    此外,隨着建築能耗分析技術的發展,人們開始考慮一些從前未曾考慮的因素對空調負荷的影響。

  • At present because architecture design is not reasonable, which leads to increase air-conditioning load and increases a part of unnecessary energy consumption in architecture.

    由于建築物的設計中有不合理之處,導緻建築物的空調負荷偏大,使建築物增加了一部分不必要的能耗。

  • The article introduces the design principle, heat power load and heat storage, air-conditioning load and ice-storage programme.

    介紹了該項目的設計原則,供熱負荷及蓄熱、空調負荷及蓄冰的運行方案。

  • The characteristics of subway air-conditioning load, such as great variation, and long time lag are discussed. A monitoring method for subway air-conditioning plants is introduced.

    探讨了地鐵空調負荷變化大、時間滞後大等特點,介紹了一種地鐵空調冷站設備的監控方式。

  • 網絡擴展資料

    “Air conditioning load”(空調負荷)是建築環境或工程領域中的專業術語,其核心含義和用法如下:

    一、基本定義

    指空調系統為維持特定空間溫度、濕度等環境條件所需處理的熱量或能耗。該負荷受建築結構、氣候條件、人員密度等多因素影響,通常分為冷負荷(Cooling Load)和熱負荷(Heating Load)兩種類型。

    二、應用場景

    1. 建築節能設計:通過計算空調負荷優化建築隔熱材料使用(如提到屋頂太陽能闆可降低負荷)。
    2. 智能控制系統:提及通過互聯網雙向控制中央空調負荷,實現能耗動态調節。
    3. 設備選型依據:空調機組容量需匹配負荷計算結果,避免能源浪費。

    三、影響因素

    主要因素 具體說明
    外部氣候 溫濕度、日照強度等環境參數
    建築圍護結構 牆體隔熱性、窗戶透光率等
    内部熱源 人員活動、電器設備發熱量

    四、相關術語區分

    發音與詞性

    如需進一步了解空調負荷計算方法(如CLTD法、諧波反應法),可參考建築熱工或暖通空調專業教材。

    網絡擴展資料二

    空調負荷是指一個空調系統所需的電力或熱量。以下是對“air conditioning load”的詳細解釋:

    例句

    用法

    空調負荷是一個工程術語,通常用于描述一個空調系統所需的電力或熱量。它可以根據房間的大小、保溫性能、周圍氣溫等因素來計算。空調負荷的大小直接影響到空調系統的能耗和使用效果。

    解釋

    空調負荷通常分為兩種類型:熱負荷和冷負荷。熱負荷是指在冷天氣條件下需要供暖的能量,而冷負荷是指在熱天氣條件下需要冷卻的能量。計算空調負荷需要考慮多種因素,如房間的面積、高度、朝向、保溫材料、窗戶數量和大小、人員數量、燈具和電器等。

    近義詞

    反義詞

    别人正在浏覽的英文單詞...

    【别人正在浏覽】