
預熱溫度
The effects of chloridization reactor, preheat temperature, chlorine flow rate, reaction temperature and reaction time on the conversion of chlorine gas were examined.
考察了氯化反應器、預熱溫度、氯氣流速、反應溫度及反應時間對氯氣轉化率的影響。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were stu***d systematically.
系統研究了激光功率、掃描速度、預熱溫度、鋪粉厚度等工藝參數對成型試樣質量的影響。
The effects of technical parameters to quenching result are researched, heat transfer coefficient, preheat temperature and quenchant temperature are regarded as the object variable.
結果表明,換熱系數是影響淬火結果的主要因素,淬火介質的溫度及零件的預熱溫度對于零件淬火後的性能影響很小;
It is found that there is a threshold energy density in laser doping, and distributions of dopant density and depth have relation to preheat temperature and plating layer thickness of the impurities.
激光摻雜存在一個阈值能量密度。摻雜濃度和深度的分布與預熱溫度和雜質鍍層厚度有關。
It is sometimes beneficial to preheat a mold so that production can start with the mold already at its operating temperature.
它有時是有益的預熱具,使生産就可以開始與具已經在其操作溫度。
"Preheat temperature"是由"preheat"(預熱)和"temperature"(溫度)組成的複合詞,指設備在正式使用前需要預先達到的指定溫度。該術語常見于以下專業領域:
烹饪領域
烤箱、烤爐等設備需提前加熱至設定溫度(如180°C)再放入食物,這能确保食材受熱均勻。例如烘焙蛋糕時,未預熱會導緻膨脹不均勻(參考:美國烘焙協會基礎指南)。
工業制造
金屬熱處理工藝中,熔爐必須達到特定預熱溫度(如650°C)再進行淬火,以防止材料因溫差産生裂紋(參考:《材料工程學報》2023年熱處理規範)。
3D打印技術
打印平台需預熱至40-60°C以防止塑料模型翹曲,不同材料(如PLA/ABS)對應不同預熱溫度區間(參考:國際增材制造标準手冊)。
該術語的核心價值在于強調"溫度控制精度"和"熱穩定性",這兩個參數直接影響最終成果質量。英國國家物理實驗室的熱力學研究報告指出,預熱溫度偏差超過±5%就會顯著影響實驗結果。
“preheat temperature”是一個複合詞,由“preheat”(預熱)和“temperature”(溫度)組成,通常指在正式使用設備(如烤箱、工業爐等)前需要預先達到的設定溫度。以下是詳細解釋:
若需具體領域的預熱溫度标準或操作步驟,可提供更多背景信息以便進一步解答。
speciallyPEFideologicalmoldyadaptableagilitymoatrestivebehestdisconcertedexhibitorlinewidthnearsidestoogingand alldifficult thinghistory museumUniversity of Birminghamaedesamyoplasiaautocatalyticduskilyencliticevodonefrenchlessheelerhemospasiahomeopathialactoperoxidaseloxotomy