
预热温度
The effects of chloridization reactor, preheat temperature, chlorine flow rate, reaction temperature and reaction time on the conversion of chlorine gas were examined.
考察了氯化反应器、预热温度、氯气流速、反应温度及反应时间对氯气转化率的影响。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were stu***d systematically.
系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。
The effects of technical parameters to quenching result are researched, heat transfer coefficient, preheat temperature and quenchant temperature are regarded as the object variable.
结果表明,换热系数是影响淬火结果的主要因素,淬火介质的温度及零件的预热温度对于零件淬火后的性能影响很小;
It is found that there is a threshold energy density in laser doping, and distributions of dopant density and depth have relation to preheat temperature and plating layer thickness of the impurities.
激光掺杂存在一个阈值能量密度。掺杂浓度和深度的分布与预热温度和杂质镀层厚度有关。
It is sometimes beneficial to preheat a mold so that production can start with the mold already at its operating temperature.
它有时是有益的预热具,使生产就可以开始与具已经在其操作温度。
"Preheat temperature"是由"preheat"(预热)和"temperature"(温度)组成的复合词,指设备在正式使用前需要预先达到的指定温度。该术语常见于以下专业领域:
烹饪领域
烤箱、烤炉等设备需提前加热至设定温度(如180°C)再放入食物,这能确保食材受热均匀。例如烘焙蛋糕时,未预热会导致膨胀不均匀(参考:美国烘焙协会基础指南)。
工业制造
金属热处理工艺中,熔炉必须达到特定预热温度(如650°C)再进行淬火,以防止材料因温差产生裂纹(参考:《材料工程学报》2023年热处理规范)。
3D打印技术
打印平台需预热至40-60°C以防止塑料模型翘曲,不同材料(如PLA/ABS)对应不同预热温度区间(参考:国际增材制造标准手册)。
该术语的核心价值在于强调"温度控制精度"和"热稳定性",这两个参数直接影响最终成果质量。英国国家物理实验室的热力学研究报告指出,预热温度偏差超过±5%就会显著影响实验结果。
“preheat temperature”是一个复合词,由“preheat”(预热)和“temperature”(温度)组成,通常指在正式使用设备(如烤箱、工业炉等)前需要预先达到的设定温度。以下是详细解释:
若需具体领域的预热温度标准或操作步骤,可提供更多背景信息以便进一步解答。
click onaimaddictedspokesmankeep abreast withhermitmorbidityaerobiosisattendscompensablecyclopentenoneEChaloedmanagesoutlayUnixbad smelleat offtake the blameasyncchloroflexaceaeciclonicatedecomposergremlingrovelingjuvenescencekalisaltpeterlarviparousmicrocameraGriffith