纖維取向；纖維定向作用
Vf , fiber orientation, fiber surface treatment, load and velocity have an great effect on friction and wear properties of K3D/EP composites.
纖維取向、纖維表面處理以及載荷和速度對K3D/EP複合材料的摩擦磨損性能有很大影響。
Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.
由于纖維取向、去除飛邊和流道料損失等是熱固性塑料加工中影響成本的主要問題，故着重介紹了降低上述費用的辦法。
The results showed that the fiber orientation distribution was mainly dependent on the shape of the cavity, fiber contents and molding condition.
結果表明，纖維取向分布主要取決于模腔幾何形狀、纖維含量和注射工藝條件等因素。
The fiber orientation of fiber suspension through two dimensional curved expansion duct is numerically simulated.
本研究數值模拟了彎曲擴張通道纖維懸浮流中的纖維取向分布。
Fiber orientation is the main properties of the parts'microstructure.
并且，纖維取向也是制品微觀結構的主要特征。
Based on Hele-Show flow, Dinh-Armstrong model is used to simulate fiber orientation for semiconcentrated short fiber reinforced plastics in injection mold filling.
本文推導了注射成型過程中纖維取向的概率分布函數，并将模拟的結果與以前研究者所做的實驗進行了比較。
It was indicated that the fiber orientation inside the rib plays a big role in the forming of the rib shrinkage mark.
研究表明：加強筋内的纖維取向是影響表面縮痕大小的主要因素，樹脂基體和成型工藝條件對表面縮痕的影響很小。
The effect of the fiber orientation in non-crimp fabrics on the reinforcing effectiveness of the concrete column cylinders is discussed.
探讨了織物纖維取向不同對系統增強效果的影響。
An image analysis system is designed for the measuring of fiber length distribution and fiber orientation distribution in three dimensions. The detail of programming method is written up.
為纖維增強混凝土中纖維的長度分布和三維取向分布設計了圖像處理系統，詳細叙述了圖像處理系統的設計方法和編程思想。
The mechanical and thermal physic properties depend strongly on the fiber orientation state during injection molding process.
纖維增強複合材料的力學性能和熱物理性能依賴于纖維的取向狀态。
The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are stu***d.
讨論了橫向剪切變形，曲闆幾何參數，鋪層數，鋪展方式和初始幾何缺陷等各種參數變化的影響。
The practical fiber ODFs of nonwoven fabrics with 4 different processing methods are measured and the data are compared with that of fiber orientation distribution measured by microscope projector.
實際測定了四種不同加工方法的非織造布纖維取向分布函數，并将數據與顯微投影法測得的纖維取向分布實測數據進行了比較。
The experimental and the numerical results are compared and the influences of different fiber orientation, ply number and hole diameter on the stress concentration factors are analyzed. Some imp…
并将實驗與計算結果進行了比較，分析了不同的纖維配置方向、層數和圓孔直徑對應力集中系數的影響。
The results show that the reflectivity of unidirectional CFRP depends on the fiber orientation and thicknesses of laminates.
結果表明，單向纖維鋪層CFRP的反射率與纖維方向及層闆厚度有關；
By analysis, the fiber orientation streak due to wake, is different from the ****** basis weight streak and cannot be eliminated by changing the operating parameters and geometric parameters.
經分析，這種波迹效應引起的纖維定向條紋，不同于簡單的定量條紋，改變勻漿輥的運行參數、幾何參數并不能消除。
The changing regularity of the deformation and compliance of resin matrix composites with the fiber orientation has been discussed.
讨論了樹脂基複合材料的柔度和變形隨纖維方向的變化規律。
A structural optimization problem is solved with the fiber orientation and the lamina thickness as the design variables and the LPF load as the objective.
以纖維方向角和層合闆厚度作為設計變量，最終失效強度為目标，對結構進行優化。
It was found that the C-scan image of a ply interface contained mostly the fiber orientation information of the two neighboring plies, with that of the upper ply often showing more prominently.
發現鋪層界面的C掃描圖大都包含兩相鄰鋪層的纖維方向信息，而上鋪層的信息顯示更明顯。
Some common applications include measuring the structural integrity of white matter, mapping white matter fiber orientation, and tracking white matter pathways.
常見的應用包括測量白質結構的完整性、繪白質纖維走向，以及追蹤白質路徑。
It is shown that the changes in fiber orientation and interfacial bond have great effect on the stress distributions and deformation characteristics of matrix.
研究表明，該類複合材料中基體的應力分布情況和變形特征将受到纖維位向改變和界面結合強弱的顯著影響。
The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.
研究中主要讨論了基體、纖維和界面的力學性能以及纖維位向的變化對應力傳遞和應力分布的影響。
The behavior of backscattering of light from nonwoven fabric is mainly dependent upon the physical properties of fibers, the fiber orientation distribution and the area density of nonwoven fabric.
非織造布的光後向散射性質主要取決于纖維的物理性質、非織造布中纖維的取向分布以及非織造布面密度。
Phase functions for fibrous layer are obtained for two types of fiber orientation:randomly oriented in space and randomly oriented in a plane parallel to the boundary surfaces of the layer.
前言：針對纖維層中兩種典型的纖維排列求得其相函數：纖維在空間隨機排列和平行于邊界面的平面上隨機排列。
The influence of MMT naonomaterials on the thermal shrinkage performance of PET fiber was investigated by means of WAXD, DSC, fiber orientation measurement, etc.
利用WAXD、DSC和聲速法等手段測試纖維的取向、結晶度及結晶形态等的變化，研究蒙脫土的加入對PET纖維熱收縮性能的影響。
Using image analysis technology, nonwovens' structure parameters, such as the pore size, pore shape, fiber orientation distribution and so on, were obtained in this paper;
利用計算機圖像處理技術，提取了孔隙尺寸、孔隙形狀和纖維取向分布等直觀表達非織造纖維材料結構的參數；
Fiber Orientation 是材料科學和工程領域的重要概念，尤其在複合材料研究中應用廣泛。以下為詳細解釋：
纖維取向通常通過數學方法或參數進行量化：
Fiber Orientation 是描述纖維排布方向的關鍵參數，通過張量、系數等數學工具量化，直接影響複合材料的性能與加工效果。理解這一概念對材料設計、工藝優化具有重要意義。
本文将詳細解釋兩個單詞：fiber 和 orientation。
Fiber 是一個英文單詞，可用作名詞或動詞。作為名詞，它的主要意思是“纖維”。比如：
作為動詞，fiber 的意思是“使成纖維狀”。例如：
Fiber 還有一些其他的用法，比如：
Orientation 是一個英文單詞，它的主要意思是“方向”或“定向”。比如：
Orientation 還有一些其他的用法，比如：
【别人正在浏覽】