
[計][通信] 傳輸延遲
How do find transmission delay of a network?
如何找到一個網絡的傳輸延遲嗎?
Transmission delay influences the stability of Internet based control systems.
網絡傳輸時延是影響遠程控制穩定性的一個主要因素。
The method is easy and has little transmission delay and multi-point transmission ability.
且實現簡單,圖像傳輸延時小,能實現多點傳輸。
In addition, we also can reduce the collision effects through increasing transmission delay.
另外,還可以通過增加傳輸延遲來減少節點碰撞。
The link layer packet error rate and transmission delay are derived to evaluate this scheme.
推導了采用該方案時無線鍊路的誤包率和包的傳輸時延的表達式。
傳輸延遲(Transmission Delay)是數據通信中的核心概念,指數據包從發送端開始傳輸到完全進入通信鍊路所需的時間。該延遲主要由數據包大小與信道帶寬的比值決定,其數學表達式為: $$ text{傳輸延遲} = frac{text{數據包長度(比特)}}{text{鍊路帶寬(比特/秒)}} $$ 例如一個10,000比特的數據包在100Mbps帶寬鍊路上傳輸時,延遲為0.1毫秒。
影響因素與工程實踐:
在衛星通信等長距離傳輸場景中,傳輸延遲需要與傳播延遲嚴格區分。前者取決于設備處理速度,後者受限于光速物理限制,這種區分對網絡協議設計至關重要(來源:Tanenbaum《計算機網絡》第6版)。
在計算機網絡中,Transmission Delay(傳輸時延/傳輸延遲)指數據從發送端開始傳輸到所有數據完全離開發送端進入信道所需的時間。它主要與數據包大小和鍊路傳輸速率相關,計算公式為:
$$ text{Transmission Delay} = frac{L}{R} $$
其中:
核心影響因素
數據包越大(L越大),傳輸時延越長;鍊路速率越高(R越大),時延越短。例如,傳輸一個1 MB的文件在1 Mbps鍊路上需要約8秒,但在100 Mbps鍊路上僅需0.08秒。
與其他延遲的區别
應用場景
傳輸時延在網絡性能優化中至關重要。例如,視頻流媒體需要低傳輸時延來避免卡頓,而大文件傳輸則可能更關注吞吐量而非極低時延。
若發送一個1500字節(即12,000比特)的數據包,通過一條速率為10 Mbps(即10,000,000比特/秒)的鍊路,則傳輸時延為:
$$
frac{12,000}{10,000,000} = 0.0012 text{秒} quad (text{即} 1.2 text{毫秒})
$$
dustbinelicithorsemanenvisionprodrecuperateanalystscryptocurrencyhickwallinhalationmikesstingstaigtorquestrickledwhirlpoolspast yearSistine ChapelToyota Motor Corporationamphibrachasphaltingcatachosisdentinedolineectomorphyexopoditefaradismfjordhydrokineticsindigolite