
[光] 折射率
What would a negative index of refraction look like?
如果折射率是負的,會發生什麼事情?
High thermal conductivity, High index of refraction glue.
自主配制高導熱、高折射率膠水。
The index of refraction for the extraordinary ray is therefore a function of direction.
折射光線的折射率因此在各個方向不同。
Within the coupled resonant frequency region, the negative index of refraction can be achieved.
在負的磁導率和負的介電常數重疊的頻率區域,能得到一個負的折射系數。
The modified effect by the complex index of refraction, wind speed and foam is quantitatively analyzed.
通過考慮海面特性的修正,定量計算了複折射率、風速和泡沫等因素對亮溫的修正效應。
折射率(index of refraction)是描述光在兩種介質中傳播時方向變化程度的物理量,定義為光在真空中的傳播速度((c))與光在介質中的傳播速度((v))之比,用公式表示為: $$ n = frac{c}{v} $$ 其中,(n)為介質的折射率,該值始終大于或等于1。
光學現象解釋
根據斯涅爾定律(Snell's Law),當光從一種介質進入另一種介質時,入射角((theta_1))與折射角((theta_2))滿足關系: $$ n_1 sintheta_1 = n_2 sintheta_2 $$ 這一公式被廣泛應用于透鏡設計、棱鏡分光等光學系統。
材料特性指标
折射率與介質的電磁性質相關,例如電介質材料的極化率。高折射率材料(如金剛石,(n=2.42))常用于高精度光學儀器,而低折射率材料(如空氣,(n≈1.0003))則影響光纖通信的信號傳輸效率。
波長依賴性
折射率會隨光的波長變化(色散現象),例如可見光在玻璃中的折射率從紫色光到紅色光逐漸降低。這一特性是彩虹形成和光學器件色差産生的原因。
折射率(Index of Refraction)是描述光在介質中傳播時方向改變程度的物理量,定義為光在真空中的速度((c))與光在該介質中的速度((v))之比,用符號(n)表示:
$$ n = frac{c}{v} $$
定義與公式
折射率越大,光在介質中的速度越慢。例如,水的折射率約為(1.33),意味着光在水中的速度為(c/1.33)。
斯涅爾定律(Snell's Law)
當光從一種介質進入另一種介質時,折射角度由兩種介質的折射率決定:
$$
n_1 sintheta_1 = n_2 sintheta_2
$$
其中,(n_1)和(n_2)為兩種介質的折射率,(theta_1)和(theta_2)分别為入射角和折射角。
材料與波長依賴性
應用場景
某些材料(如超材料)具有負折射率,導緻光沿非常規路徑折射,用于隱身技術研究。折射率是理解光與物質相互作用的基礎,廣泛應用于物理、工程和材料科學領域。
reassuregulfplighttaciturninterplaycultistKuwaitirefractedwheedledbaseball gamebiological treatmentclinical manifestationcoronary artery bypassfuck offpremature ovarian failurerelative standardacetoximeaerogeologychloralamidecunnusdisacchariduriaespialforstanlimanlocoweedmarrowbonemedicamentmesoidMSWsilicon tetrachloride