月沙工具箱
现在位置:月沙工具箱 > 学习工具 > 英语单词大全

tunnel boring machine是什么意思,tunnel boring machine的意思翻译、用法、同义词、例句

输入单词

常用词典

  • 隧道掘进机;隧道钻巷机;隧道开挖机

  • 例句

  • In this paper, three typical scheme design on mucking and transporting system of tunnel boring machine is stu***d, and the dispatch of the equipment in .

    本文在研究隧洞掘进机开挖隧洞出碴及材料运输三种典型方案后,对其调度方案进行了设计计算。

  • To improve the capacity and efficiency of the design system of backup transportation scheme for tunnel boring machine(TBM), a new hybrid-solving method was proposed.

    为提高隧道掘进机后配套运输方案设计系统的能力和效率,提出了一种工程装备方案设计的混合求解方法。

  • In order to rationalize type selection of the full face rock tunnel boring machine, a comprehensive solution substituting the empirical choosing method is presented.

    为了使隧道掘进机选型决策理性化,避免单纯依靠设计者的经验进行选型,研究一种综合解决方案。

  • Mountain tunnel construction with high water pressure will apply the tunnel boring machine method (TBM) more and more.

    长大深埋高水压山岭隧道的施工将越来越多地采用隧道掘进机法。

  • Being a crucial factor in influencing the performance of Full Face Rock Tunnel Boring Machine (TBM), the cutterhead design is one of the key issues of TBM.

    刀盘设计是全断面岩石隧道掘进机(TBM)的设计关键,是影响其掘进性能的决定性因素。

  • Productivity of the tunnel boring machine is evaluated by predicting the time and cost.

    通过对掘进机施工工期和成本的预测,评估掘进机的效能。

  • Using artificial intelligence to make a type selection of full face rock tunnel boring machine an intelligent design system was established.

    利用人工智能技术对全断面岩石掘进机进行优化选型,实现掘进机方案设计智能化。

  • Especially, to the tunnels constructed by TBM(Tunnel Boring Machine), the work for advance geological prediction is crucial to the successful construction of a project.

    尤其是对于TBM施工隧洞,超前地质预报工作开展的好坏是工程能否成功建设的关键。

  • A full face rock tunnel boring machine was highly sensitive to geologic situation.

    全断面岩石掘进机施工对地质地层状况非常敏感。

  • A kind of electro-hydraulic simulation system of earth pressure balance of tunnel boring machine based on hydraulic power control principle was proposed.

    提出一种基于液体动力控制原理的盾构土压平衡电液模拟系统。

  • Correctly determining quality parameters of rock is the theoretical basis of use of TBM(full face rock tunnel boring machine)and its design.

    正确确定岩石的性能参数是全断面岩石掘进机使用及高性能全断面岩石掘进机研制的理论基础。

  • He is also experienced in soft ground tunnelling using Tunnel Boring Machine and NATM methods carried out in difficult ground conditions and at close proximity to important structures.

    经历过使用盾构机进行软土掘进和在困难地层及靠近重要构筑物条件下使用新奥法。

  • The cutterhead and rock mass characteristics affect the excavation efficiency of full face rock tunnel boring machine (TBM) strongly.

    全断面岩石掘进机(TBM)的破岩效率主要受刀盘设计和岩体特征的影响。

  • The kerf is the outside boundary of the tunnel wall that a boring machine gouges out as it bores through the ground or rock.

    切口在隧道壁边界的外面,隧道壁是由钻机在钻透土地或岩石时挖出的。

  • At the same time mechanical tunnel boring equipment will grind up the rock and soil detached by the melted kerf and pass it to the rear of the machine for disposal by conveyor slurry pipeline etc.

    同时机械的隧道钻孔设备会磨碎的岩石和土壤,被熔化的切口分离并传到机器的后面,由传送机、输浆管道等进行清理。

  • Three-dimensional FEM is used to calculate the deformation and stability of tunnel under tunnel boring machine (TBM) excavation in big fault zone after pre-grouting.

    利用三维有限元方法,计算研究大型断层区超前注浆加固后在TBM开挖过程中隧洞变形稳定情况。

  • Breaking rock rolling cutters are cutters of breaking rock with rolling in the way of the push of the cutterhead, they are used widespread in the full face rock tunnel boring machine.

    滚动破岩刀具是在刀盘的推压力作用下滚动破碎岩石的刀具,广泛用于全断面岩石掘进机上。

  • A semi-metallic phenolic resin-based friction material was developed for friction facing on clutch disc in tunnel boring machine.

    研制了半金属树脂基摩擦材料,对其摩擦学等性能进行了研究。

  • A subway construction worker, known as a sandhog exits the tunnel boring machine in the northbound tunnel of the Second Avenue subway construction project, Thursday, April 7, 2011 in New York.

    2011年4月7日,纽约,被称作“沙狗”的隧道挖掘工人从第二大街地铁建筑工程的北向的隧道的隧道掘进机中走出。

  • 同义词

  • |tunnel borer;隧道掘进机;隧道钻巷机;隧道开挖机

  • 专业解析

    隧道掘进机(Tunnel Boring Machine,简称TBM)是一种用于地下隧道全断面开挖的重型工程机械。其核心功能是通过旋转刀盘上的滚刀破碎岩土,同时整合推进、支护、出渣等工序,实现隧道施工的高度机械化与自动化。以下从技术原理、结构组成及实际应用三方面展开说明:

    1. 技术原理与结构特征

    TBM采用封闭式刀盘系统,刀盘配备硬质合金或金刚石刀具,通过液压马达驱动旋转切削地层。推进系统依靠千斤顶施加轴向推力,配合管片拼装机实时安装预制混凝土衬砌,形成隧道支护结构。出渣系统则通过螺旋输送机或泥浆泵将碎岩输送至后方。典型代表如德国海瑞克(Herrenknecht)公司生产的复合式TBM,可适应软土、硬岩等复杂地质条件。

    2. 工程应用与权威案例

    3. 技术标准与安全规范

    依据《全断面隧道掘进机术语和商业规格》(GB/T 34354-2017),TBM需满足扭矩输出精度±2%、推进速度自适应调节等48项性能指标。美国职业安全与健康管理局(OSHA)要求TBM作业面必须配置紧急停机系统和有害气体监测装置(OSHA标准29 CFR 1926.800)。

    网络扩展资料

    Tunnel Boring Machine(TBM),中文译为全断面隧道掘进机或盾构机,是一种用于隧道施工的先进机械装置。以下是其详细解释:


    基本定义


    核心功能与特点

    1. 一体化施工
      TBM集开挖、支护、出渣等功能于一体,通过旋转刀盘上的滚刀或刀具破碎岩土,同时铺设管片支撑隧道壁。
    2. 高效性
      相比传统钻爆法,TBM施工效率可提高8-10倍,且自动化程度高,减少人工干预。
    3. 安全性
      护盾结构(盾构机特有)可临时支撑隧道壁,防止塌方,适用于复杂地质条件。

    分类与区别


    应用领域


    局限性


    术语来源

    如需进一步了解技术细节或案例,、、等来源。

    别人正在浏览的英文单词...

    Jan.anywheredecorationtemple fairlysearduousnessblanketsCharmiandefaultedintestinalnotandumPODSderived functiondust collectorknowledge representationnew comernutrition and health careon the occasion ofperishable goodsplenary sessionreduced pricesoft ferriteabsorptivityanalginapareuniaarthrifugecoenologydribhemocytologyinterdiction