矫直机；矫正机；平直机
Straightening machine is a metal bar, pipe, wire, and other equipment for straightening.
矫直机是对金属棒材、管材、线材等进行矫直的设备。
The determination of the roll camber parameters is an important basis for designing the straightening machine.
矫直机矫直辊辊型参数的确定，是设计矫直机的重要理论依据。
The paper, combined with the 45~76 straightening machine designed, provides a theoretical method for designing the straightening roll camber.
结合已设计出的45～76焊管生产线中的六辊矫直机，阐明了矫直辊辊型设计的一种方法。
Straightening roller straightening machine through the bars of pressure for them to change, such as straightness.
矫直机通过矫直辊对棒材等进行挤压使其改变直线度。
The straightening principle and the calculation method for the force and power of this straightening machine is discussed.
并论述了该矫直机的矫直原理及力能参数的计算方法。
According to the production ability of small workshop, the selection and determination of structural parameter and technological parameter for straightening machine are discussed.
根据小型车间生产能力，论述了矫直机结构参数和工艺参数的选择与确定。
The straightening machine checks the mechanical fasteners and the hydraulic transmission system during the shift, the operation handle and button can be normal.
矫直工在交接班时先检查机械紧固件和液压传动系统，操作手柄及按钮能否正常。
Based on the model, the straightening stroke can be calculated, so it is solved to apply FEM to automatic straightening machine.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
The paper introduces the process automation model specification system of heavy and medium plate rolling production line hot straightening machine in TangShan Heavy and medium Plate Co.
介绍唐山中厚板公司中厚板轧钢生产线热矫直机过程自动化模型设定系统的组成、主要数学模型。
Based on the model of straightening process, theoretical basis of formula calculating straightening amount was analyzed. It is helpful for design and development of automatic straightening machine.
根据校直过程模型，对现有校直修正量的计算公式进行了理论分析，为自动校直机的开发研制提供了技术支持。
This paper expounded the operating principle of automatic straightening machine for a shaft workplace and the design of hardware and software for its three main parts.
本文阐述了轴类工件自动校直机的工作原理及其三个重要组成部分（自动检测、工件定位和压头驱动）的硬、软件设计。
A straightening machine controller based on embedded technology is introduced in this paper.
本文介绍了基于嵌入式技术的自动校直机控制器的设计。
To improve the precision and the efficiency in straightening drill pipes, we make a research in the control system of the automatic hydraulic straightening machine.
为了提高钻具校直的精度与效率，我们进行了全自动液压校直机控制系统的研究。
The force and performance of this straightening machine are analyzed and calculated for designing.
对矫直力能参数进行了分析计算，可为设计矫直机提供参考。
Participated in the in-site commissioning of piercer, tube mill, sizing mill, and straightening machine of seamless steel tube (……)
山东聊城中钢联无缝钢管中钢联无缝钢管穿孔机，轧管机，定径机，矫直机的现场调试。
The invention discloses a novel rail-straightening machine capable of effectively improving a straightening dead zone of a rail, and avoids waste caused by cutting off the straightening dead zone.
本发明公开了一种可有效改善钢轨矫直盲区的新型钢轨矫直机，避免将矫直盲区切除造成生产浪费。
The steel bar straightening and cutting machine arranges a straightening machine and a cutting machine on the same stander and saves other relative mechanisms.
本实用新型把矫直机构和切断机构安装在同一机架上省去了相关的其它机构。
Simultaneously, the curvature before straightening also affects the size of force on straightening, and it also affects the life span of straightening machine deeply.
同时，钢轨的矫前弯曲度还影响矫直力的大小，进而影响矫直机的寿命。
The hydraulic-servo system of the precise straightening machine is the executive body and is the essential condition to realize straightening technics.
精校机液压伺服系统是精校机的执行环节，是实现校直工艺的必要条件。
The invention relates to a straightening machine.
本发明涉及矫直机。
There are also two roller straightening machine, relying on two rollers (Concave Intermediate, hyperbolic roll) the perspective of the different changes in the diameter of the material straightening.
也有两辊矫直机，依靠两辊（中间内凹，双曲线辊）的角度变化对不同直径的材料进行矫直。
Roll sheet material straightening machine is to use the Bauschinger effect, both positive and negative bending of the plate several times.
辊式板材矫直机是利用材料的“包辛格效应”，对板材进行多次正反弯曲。
Type of straightening of the main pressure, balance roller straightening machine, shoes roller straightening machine, anti-rotation bending leveler and so on.
主要类型有压力矫直机、平衡滚矫直机、鞋滚矫直机、旋转反弯矫直机等等。
This paper states the basic principle of operation of cold drawing and straightening machine. It derives basic formula to determine the major size and parameters.
说明了该冷拉调直机的基本工作原理，推导了确定关键尺寸参数的基本公式。
The hydraulic-servo system of the precise straightening machine is the key to ensure the processing accuracy of the workpiece.
精校机液压伺服系统是保证工件加工精度的关键。
THE STRAIGHTENING MACHINE AND THE STRAIGHTENING TECHNOLOGY Straightening machine is a metal bar, pipe, wire, and other equipment for straightening.
矫直机是对金属棒材、管材、线材等进行矫直的设备。
The mechanical structure of the straightening machine was designed, including the detect and locate system, the straighten system, the automatic loading and discharge system and so on.
在理论分析的基础上，根据校直过程的工艺流程和要求，完成了自动校直机的机械设计，主要包括检测与定位系统设计、加载校直系统设计、自动上下料系统设计。
|straightener/flattening machine;矫直机；矫正机；平直机
矫直机（Straightening Machine） 是一种用于矫正金属型材（如棒材、线材、管材、板材、型钢等）弯曲、扭曲或不平直缺陷的工业设备。其核心功能是通过施加特定的力或压力，使材料发生塑性变形，从而恢复或达到所需的直线度或平面度要求。以下是详细解释：
矫直机利用弹塑性变形原理工作。材料通过多组交错排列的辊轮（辊式矫直机）或模具（压力矫直机）时，受到反复反向弯曲应力。当应力超过材料的屈服强度时，材料发生塑性变形；卸载后，弹性变形恢复，而塑性变形保留，最终实现整体矫直。辊轮或模具的排列角度、压力大小可根据材料特性（如材质、直径、弯曲度）动态调整。
通过多组辊轮对材料进行连续弯曲矫直，适用于长尺寸棒材、管材、线材的高效批量处理。例如，钢材生产线上常见的七辊或九辊矫直机。
采用液压或机械压力，通过模具对材料局部施压矫正，适用于厚板、大型型钢或局部变形修复。
结合旋转与压力，用于高精度矫直精密轴类零件，常见于汽车零部件制造。
关于矫直机的力学模型与设计标准，可参考机械工程领域权威手册：
（注：因搜索结果未提供可直接引用的网页链接，以上内容依据机械制造领域通用技术文献及行业标准撰写，确保术语定义与应用场景的准确性。）
“Straightening machine”是工业领域中常见的设备，主要用于矫正材料的弯曲或变形。以下是详细解释：
若需进一步了解具体型号或操作流程，可参考专业机械手册或行业标准（如、8、9）。
take a showerabandonedbe on totrack recordactivatingbleuchapattidecayedglyphosateHMOincomparableNeptunusparameterspunsrehearsedvirtuosoassistant managerembedded systeminfrared radiationsection steelticket inspectoracetyldihydrocodeineauristbersaglieredeuterosyncytiumEBCDICfoorageLiopteridaeSSRSHIMADZU