月沙工具箱
现在位置:月沙工具箱 > 学习工具 > 英语单词大全

operational amplifier是什么意思,operational amplifier的意思翻译、用法、同义词、例句

输入单词

常用词典

  • [电子] 运算放大器

  • 例句

  • The circuit is constructed by a operational amplifier and bipolar transistor current mirrors with multiple outputs.

    该电路由一集成运算放大器及多端输出的双极晶体管电流镜构成。

  • In the case of ideal operational amplifier, circuit analysis was simplified by the ideal summing point restraints of zero voltage and zero current at the inverting input.

    对于理想的运算放大器而言,通过倒相输入处零电压和零电流的理想求和点限制,可以简化电路分析过程。

  • This kind of operational amplifier has higher dynamic scope and has solved the problem that the signal amplitude gets limit by the bias voltage, and has higher bandwidth.

    这种运算放大器具有较高的动态范围,并解决了偏置电压引起的信号摆幅受限的问题,而且具有更高的带宽。

  • A Simple error analysis method for an operational amplifier is presented in this paper.

    本文给出运算放大器误差分析的一种统一的简易方法。

  • Electrometer and nanovoltmeter characteristics differ, so the operational amplifier requirements for these two types of instruments are also somewhat different.

    静电计和纳伏表的特性不同,所以这两种仪器对运算放大器的要求也有所不同。

  • By analyzing the principle of compound operational amplifier, a high performance amplifier is designed by using two operational amplifiers, so an idea integrator is achieved.

    分析了复合运放提高性能的原理,利用两运算放大器设计了高性能复合放大器,以构成理想的积分电路。

  • Ultra low offset voltage operational amplifier.

    超低失调电压运算放大器。

  • There may be saturation in the differential circuit built with the operational amplifier(Op Amp), which causes that the relationship between input and output is not differential expression.

    用运算放大器构造的微分电路可能存在饱和现象,导致输出与输入电压之间不满足微分关系,使微分电路失去应有性能。

  • The design of single power operational amplifier is presented.

    介绍了单电源运算放大器的设计方法。

  • Some teaching material treat that the integrated operational amplifier which makes up the voltage comparer only works in the nonlinear area.

    在一些教材中论述,构成电压比较器的集成运算放大器仅仅是工作在非线性区。

  • The silicon PV production figures show the laser intensity measuring instrument approach. This paper mainly involves operational amplifier and power supply, and other relevant knowledge.

    介绍用硅光电池制作数字显示的激光相对强度测量仪的方法,主要涉及运算放大器和稳压电源等相关知识。

  • Typical analysis of the constant-current resistance and the output current error, The writer gives the analysing process by means of operational amplifier.

    从恒流源内阻和形成输出电流误差两个方面,给出用运算放大器构成压控恒流源的分析结果。

  • An ideal operational amplifier has infinite input impedance, infinite gain for the differential input signal, zero gain for the common-mode input signal, zero output impedance, and infinite bandwidth.

    理想的运算放大器具有无穷大的输入阻抗、无穷大的差分输入增益、零共模输入增益、零输出阻抗及无穷大的带宽。

  • It consists of an operational amplifier (op-amp) and resistor feedback networks.

    该放大器由运算放大器和电阻反馈网络组成。

  • Using the characteristic of integrated operational amplifier, an electric bridge circuit sensor without nonlinear error in its output voltage is designed.

    利用集成运算放大器的特点,设计了输出电压无非线性误差的电桥电路传感器。

  • High Speed, High Output Current, Dual Operational Amplifier.

    高速,高输出电流,双路运算放大器。

  • Low Noise, Precision, High Speed Operational Amplifier.

    低噪声,高精度,高速运算放大器。

  • Detecting circuit consists of a fully differential operational amplifier and an instrument amplifier.

    探测电路由全差分运算放大器和仪表放大器组成。

  • Quad high-speed, fast-settling, high output current operational amplifier.

    四高速,快速稳定,高输出电流运算放大器。

  • The principle figures of input stage middle gain stage and output stage for a usual two stage low-voltage CMOS operational amplifier and their principal performance are presented in the paper.

    给出了一种常用两级低电压CMOS运算放大器的输入级、中间增益级及输出级的原理电路图,并阐述其主要工作特性。

  • Dual, Wideband, High Output Current, Operational Amplifier with Current Limit.

    双路,宽带,高输出电流运算放大器的电流限制。

  • The paper designs a low voltage, micro power CMOS operational amplifier with rail-to-rail output.

    完成了一个低压微功耗CMOS轨至轨输出运算放大器的研究设计。

  • High slew rate, wide bandwidth, single supply operational amplifier.

    高转换率,宽带宽,单电源运算放大器。

  • Linear building block - quad low power operational amplifier.

    线性构造块-四低功耗运算放大器。

  • Several active stimulated inductors which are made of resistors, capacitors and integrated operational amplifier are researched.

    研究了几种用电阻、电容和集成运算放大器组成的有源模拟电感;

  • Author discusses wholly the treatments of three analytical techniques for linear operational amplifier circuits.

    在此基础上,系统地论述了线性运算放大器电路分析的三种方法。

  • High precision integrated circuit operational amplifier KD205 designed and developed by our factory is described in this paper.

    本文介绍我厂设计和研制成功的高精度集成电路运算放大器KD205。

  • In circuit design, the mathematical model of operational amplifier expanded function is expanded circuit. The circuit includes phase electric capacity, the feedback resistance and the input impedance.

    运算放大器扩展功能,在电子电路设计中其数学模型为放大电路,含移相电容、反馈电阻及输入阻抗。

  • 专业解析

    运算放大器(Operational Amplifier,简称Op-Amp)是一种高增益的直流耦合电压放大器集成电路,具有差分输入和单端输出。其核心功能是对输入电压差进行放大,是模拟电子电路中最基础且应用最广泛的元件之一。以下是其详细解释:

    一、核心特性与工作原理

    1. 高增益与差分输入

      运算放大器通常具备极高的开环电压增益(可达 (10) 以上,即 (100 text{dB})),能将微小的差分输入电压((V+ - V-))放大为大幅输出信号。理想运放模型包含以下特性:

      • 无限大开环增益((A_{OL} to infty))
      • 无限大输入阻抗(输入电流趋近于零)
      • 零输出阻抗(驱动负载能力强)
      • 无限大带宽(无频率限制)
    2. 虚短与虚断概念

      在负反馈配置下,运放通过以下原理简化电路分析:

      • 虚短(Virtual Short):(V+ approx V-)(因 (A_{OL}) 极大,输入压差趋近于零)。
      • 虚断(Virtual Open):输入电流 (I+ = I- approx 0)(因输入阻抗极高)。

        例如,反相放大器电路中,反馈电阻 (Rf) 与输入电阻 (R{in}) 决定闭环增益 (A_v = -frac{Rf}{R{in}})。


    二、关键参数与技术指标

    1. 增益与带宽

      • 开环增益((A_{OL})):典型值 (10)(100 dB),实际器件随频率升高而下降。
      • 增益带宽积(GBW):单位增益频率((f_T)),如 LM741 的 GBW 约 (1 text{MHz})。
      • 压摆率(Slew Rate):输出变化速率上限(如 (0.5 text{V/}mutext{s})),限制大信号响应速度。
    2. 输入/输出特性

      • 输入失调电压((V_{OS})):典型值 (1 text{mV}),需外部调零电路补偿。
      • 共模抑制比(CMRR):抑制共模信号的能力((>90 text{dB}))。
      • 输出摆幅:受供电电压限制(如轨到轨运放可接近电源轨)。

    三、典型应用电路

    1. 基础配置

      • 反相放大器:输出与输入反相,增益由电阻比设定。
      • 同相放大器:输出与输入同相,输入阻抗高。
      • 电压跟随器:增益为1,用于阻抗匹配((V{text{out}} = V{text{in}}))。
    2. 高级功能电路

      • 差分放大器:抑制共模噪声,用于传感器信号调理。
      • 积分器/微分器:利用电容实现时域运算。
      • 有源滤波器:结合RC网络设计频响特性(如Sallen-Key结构)。

    四、技术演进与选型

    现代运放已发展出多种类型:


    参考资料

    1. 《模拟电子技术基础》(童诗白、华成英):高等教育出版社,经典教材第5章详述运放原理与应用。
    2. Texas Instruments《Op Amps for Everyone》:系统介绍运放设计与实践(TI技术手册)。
    3. Analog Devices《Op Amp Applications Handbook》:涵盖高级电路设计案例(ADI在线资源)。
    4. IEEE论文《CMOS Operational Amplifiers》:分析现代运放架构(IEEE Xplore DOI: 10.1109/JSSC.1983.1052012)。

    网络扩展资料

    Operational Amplifier(运算放大器) 是一种高增益的电子电压放大器,通常用于模拟电路中对信号进行放大、滤波、运算等操作。以下是详细解释:


    1. 基本结构与符号


    2. 核心特性


    3. 关键参数


    4. 典型应用电路


    5. 实际使用注意事项


    运算放大器是模拟电路设计的核心元件,广泛应用于信号处理、控制系统、传感器接口等领域。其理想化模型简化了电路分析,但实际设计需结合具体型号的参数(如LM741、OPA2134等)。

    别人正在浏览的英文单词...

    lookall the timecheerfulvegetarianwoeconvokeinfernalFederickkarmicMaseratimicroplasticsrecommendedrustsnip inphase anglepituitary glandstanding ovationthermal barriervirus infectionadnexedaerodynecohesiometerdogleggedgastroptyxisgussyhypaconinekbytelorettoitemangelmicrofilament