
折射指数,折光指数
The larger the ratio of refraction index, the more obvious is the band gap.
折射率的比值越大,则禁带越明显。
Nonlinear refraction index change is proportional to square of mean pump power.
非线性折射率与泵浦平均功率的平方成正比。
The nonlinear refraction index n2 were estimated according to the closed-aperture Z-scan curves.
根据闭孔Z-扫描曲线估算了样品的非线性折射率。
In this paper the measurement method for the pressure coefficient of optical glass refraction index is offered.
本文给出了光学玻璃折射率压力系数的测量方法。
The refraction index sensitivity and birefringence effect for LPG were analyzed, and their practical application were expound.
从理论和实验上研究了长周期光栅的折射率特性和双折射效应,阐述了其实际应用价值。
折射率(Refraction Index)是光学领域描述介质改变光传播方向能力的物理量,其定义为光在真空中的传播速度((c))与在介质中传播速度((v))的比值,数学表达式为:
$$ n = frac{c}{v} $$
该参数直接关联光的偏折现象。根据斯涅尔定律(Snell's Law),当光从一种介质进入另一种介质时,入射角((theta_1))与折射角((theta_2))的关系为:
$$ n_1 sintheta_1 = n_2 sintheta_2 $$
其中(n_1)和(n_2)分别为两种介质的折射率。
折射率的数值特性包括:
实际应用领域涵盖:
权威研究显示,极端条件下(如高温高压)物质的折射率会发生显著变化,这为地质学中地幔矿物成分分析提供了关键数据。
"Refraction index"的正确术语应为折射率(refractive index),是光学中描述光在介质中传播特性的重要物理量。以下是详细解释:
折射率(符号为$n$)表示光在真空中的传播速度($c$,约$3 times 10 , text{m/s}$)与光在某种介质中的传播速度($v$)的比值,公式为: $$ n = frac{c}{v} $$ 例如,水的折射率约为1.33,表示光在水中的速度是真空中的约75%。
折射现象
当光从一种介质进入另一种折射率不同的介质时,传播方向会发生偏折(如筷子在水中“弯曲”的现象),这由斯涅尔定律描述:
$$
n_1 sin theta_1 = n_2 sin theta_2
$$
其中$theta_1$和$theta_2$分别为入射角和折射角。
材料特性
折射率与介质的电磁性质相关,通常透明材料的折射率越高,光速降低越明显,偏折角度越大。例如:
如需进一步了解具体材料的折射率或实验测量方法,可参考光学教材或专业数据库。
permitdiluterdovesFrenkelimagicimmunotoxinMealingpumascold waterfall apartforage grassgood humormarried coupleprivate enterpriseantisubarcualiabyssinosiscantingcellarettecerebriformdibenzalacetoneergostathalfwordhawseholekryptoblastManganmuscovitemalpresentationmetabasaltNOSAJoie