
n. 鍊闆輸送機
The consuming of the circle chains and scrapers is a main consuming when the circle chain scraper conveyor is operated.
圓環鍊刮闆輸送機的圓環鍊和刮闆的消耗是該機運行中最主要的材料消耗。
Therefore, it is particularly necessary to analyze the cause of chain fracture of chain scraper conveyor and prevent the accident.
因此,分析造成刮闆輸送機斷鍊事故的原因并加以預防,顯得尤為必要。
This text calculates the advance tension of scraper conveyor, and the distributing of the chain tension of scraper conveyor while operating.
本文分析了刮闆輸送機的預張力計算,以及刮闆輸送機運行中的鍊條張力分布。
This mobility, reduced to the vertical plane, is unsatisfactory in a scraper chain conveyor.
這流動性,減少到垂直平面,是令人不滿的在刮闆鍊式傳送機。
That is, as a rule, a scraper chain conveyor does not only follow synclines and anticlines, but it also frequently follows curves.
這就是,作為一項規則,刮闆鍊式輸送機不隻能跟着向斜和背斜,但它也常常如下曲線。
On the base of this, the optimum structure of chain wheel module for scraper conveyor is obtained.
在此基礎上,找出刮闆輸送機鍊輪組件的最佳結構。
Most scraper conveyor trouble is chain breakage.
刮闆輸送機事故多為斷鍊事故。
Ring chain is applicable to coal mine scraper conveyor, plough, drum shearer and other mechanical traction chain, etc.
圓環鍊適用于煤礦刮闆輸送機、刨煤機、滾筒采煤機及其它機械牽引鍊等。
This paper analyses unreasonable place of the scraper chain and scraper of SGD—20B type scraper conveyor. Improving way is adopted and the effect is very good.
分析了SGD—2 0B型刮闆輸送機刮闆鍊中鍊條及刮闆的不合理處,采取了改進措施,取得了良好的效果。
Mainly introduced the coal mine use very widespread SGB-620/40T scraper chain conveyor speed reducer's damage form and the preventive measure which should adopt in a next better use.
主要介紹了煤礦礦山使用非常廣泛的SGB-620/40T型刮闆輸送機減速機的損壞形式和在今後更好的使用應采取的預防措施。
In addition, breaks in the horizontal plane occur between the trough section, in principle, also during the shifting of the scraper chain conveyor.
此外,休息,在水平面之間發生谷底節,在原則上,也就是在不斷變化的刮闆鍊式輸送機。
鍊式刮闆輸送機(Chain Scraper Conveyor)是工業生産中重要的連續輸送設備,由三個核心組件構成:
鍊條(Chain)
采用合金鋼制造的閉環牽引構件,其強度可達800-1200 MPa,通過鍊輪驅動實現動力傳輸。工業級鍊條需符合ISO 1977标準,具有耐磨、抗拉伸特性,常用于重載工況。
刮闆(Scraper)
安裝在鍊條上的錳鋼制鏟狀組件,刮闆厚度通常為6-12 mm,與槽底保持3-5 mm間隙。其特殊弧形設計能有效刮運粉狀或顆粒物料,刮料效率達95%以上,符合ASME B20.1安全标準。
輸送槽(Conveyor)
由16Mn鋼闆焊接而成的U型槽體,标準槽寬範圍為300-1200 mm,傾斜角度可達30°。槽體内襯的高分子聚乙烯耐磨闆可降低摩擦系數至0.15-0.25,顯著延長使用壽命。
該設備通過電動機驅動鍊輪帶動刮闆鍊循環運動,物料在封閉槽體内被連續刮送,適用于煤炭、糧食等散狀物料輸送,最高輸送量可達800 t/h。設備配置溫度傳感器和過載保護裝置,符合CE機械指令2006/42/EC要求。
"chain scraper conveyor" 是一種工業輸送設備,其含義和特點可綜合解釋如下:
基本定義
中文譯為鍊闆輸送機或鍊式刮闆輸送機,由鍊條(chain)、刮闆(scraper)和輸送槽(conveyor)三部分構成。主要用于顆粒狀、粉末狀或塊狀物料的水平或傾斜運輸,常見于礦山、冶金、化工等領域。
結構特點
工作原理
通過電機驅動鍊條循環運動,帶動刮闆在輸送槽内滑動,物料在刮闆的推動下沿預定路徑移動。適用于重載、高溫或潮濕環境。
應用場景
相關術語擴展
若需具體型號參數或更詳細技術說明,可參考、9中的設備介紹。
【别人正在浏覽】