
n. 链板输送机
The consuming of the circle chains and scrapers is a main consuming when the circle chain scraper conveyor is operated.
圆环链刮板输送机的圆环链和刮板的消耗是该机运行中最主要的材料消耗。
Therefore, it is particularly necessary to analyze the cause of chain fracture of chain scraper conveyor and prevent the accident.
因此,分析造成刮板输送机断链事故的原因并加以预防,显得尤为必要。
This text calculates the advance tension of scraper conveyor, and the distributing of the chain tension of scraper conveyor while operating.
本文分析了刮板输送机的预张力计算,以及刮板输送机运行中的链条张力分布。
This mobility, reduced to the vertical plane, is unsatisfactory in a scraper chain conveyor.
这流动性,减少到垂直平面,是令人不满的在刮板链式传送机。
That is, as a rule, a scraper chain conveyor does not only follow synclines and anticlines, but it also frequently follows curves.
这就是,作为一项规则,刮板链式输送机不只能跟着向斜和背斜,但它也常常如下曲线。
On the base of this, the optimum structure of chain wheel module for scraper conveyor is obtained.
在此基础上,找出刮板输送机链轮组件的最佳结构。
Most scraper conveyor trouble is chain breakage.
刮板输送机事故多为断链事故。
Ring chain is applicable to coal mine scraper conveyor, plough, drum shearer and other mechanical traction chain, etc.
圆环链适用于煤矿刮板输送机、刨煤机、滚筒采煤机及其它机械牵引链等。
This paper analyses unreasonable place of the scraper chain and scraper of SGD—20B type scraper conveyor. Improving way is adopted and the effect is very good.
分析了SGD—2 0B型刮板输送机刮板链中链条及刮板的不合理处,采取了改进措施,取得了良好的效果。
Mainly introduced the coal mine use very widespread SGB-620/40T scraper chain conveyor speed reducer's damage form and the preventive measure which should adopt in a next better use.
主要介绍了煤矿矿山使用非常广泛的SGB-620/40T型刮板输送机减速机的损坏形式和在今后更好的使用应采取的预防措施。
In addition, breaks in the horizontal plane occur between the trough section, in principle, also during the shifting of the scraper chain conveyor.
此外,休息,在水平面之间发生谷底节,在原则上,也就是在不断变化的刮板链式输送机。
链式刮板输送机(Chain Scraper Conveyor)是工业生产中重要的连续输送设备,由三个核心组件构成:
链条(Chain)
采用合金钢制造的闭环牵引构件,其强度可达800-1200 MPa,通过链轮驱动实现动力传输。工业级链条需符合ISO 1977标准,具有耐磨、抗拉伸特性,常用于重载工况。
刮板(Scraper)
安装在链条上的锰钢制铲状组件,刮板厚度通常为6-12 mm,与槽底保持3-5 mm间隙。其特殊弧形设计能有效刮运粉状或颗粒物料,刮料效率达95%以上,符合ASME B20.1安全标准。
输送槽(Conveyor)
由16Mn钢板焊接而成的U型槽体,标准槽宽范围为300-1200 mm,倾斜角度可达30°。槽体内衬的高分子聚乙烯耐磨板可降低摩擦系数至0.15-0.25,显著延长使用寿命。
该设备通过电动机驱动链轮带动刮板链循环运动,物料在封闭槽体内被连续刮送,适用于煤炭、粮食等散状物料输送,最高输送量可达800 t/h。设备配置温度传感器和过载保护装置,符合CE机械指令2006/42/EC要求。
"chain scraper conveyor" 是一种工业输送设备,其含义和特点可综合解释如下:
基本定义
中文译为链板输送机或链式刮板输送机,由链条(chain)、刮板(scraper)和输送槽(conveyor)三部分构成。主要用于颗粒状、粉末状或块状物料的水平或倾斜运输,常见于矿山、冶金、化工等领域。
结构特点
工作原理
通过电机驱动链条循环运动,带动刮板在输送槽内滑动,物料在刮板的推动下沿预定路径移动。适用于重载、高温或潮湿环境。
应用场景
相关术语扩展
若需具体型号参数或更详细技术说明,可参考、9中的设备介绍。
【别人正在浏览】