月沙工具箱
現在位置:月沙工具箱 > 學習工具 > 英語單詞大全

spheroidal graphite cast iron是什麼意思,spheroidal graphite cast iron的意思翻譯、用法、同義詞、例句

輸入單詞

常用詞典

  • [材] 球墨鑄鐵

  • 例句

  • Rope guide is wear resistant, heavy-duty, made of spheroidal graphite cast iron.

    球墨鑄鐵導繩器,重級制,耐磨性好。

  • Using the method of isothermal forging spheroidal graphite cast iron pipe of good quality can be produced.

    利用等溫鍛造方法可生産優質的球墨鑄鐵管。

  • As a consequence of recry stalliza-tion, the matrix is strengthened to increase synthetical properties of spheroidal graphite cast iron.

    由于再結晶,基體得到強化,提高了球墨鑄鐵的綜合性能。

  • The experimental research on' diffusion bonding of spheroidal graphite cast iron and copper is conducted by adopting the self-made equipment of small vacuum diffusion bonding .

    采用自制的小型真空擴散接合裝置,進行了球鐵與銅擴散接合試驗研究。

  • According to the maximum pressure to bear, pump body and cover can be made of grey cast iron (1.6Mpa), spheroidal graphite cast iron (2.0Mpa) or cast steel (2.5Mpa, including stainless steel).

    根據泵承受的最大壓力,泵體和泵蓋材質采用灰口鑄鐵(1.6Mpa)、球墨鑄鐵(2.0Mpa)、鑄鋼(2.5Mpa,包括不鏽鋼)。

  • This paper conducts a research on the influence on the mechanical propeerties of spheroidal graphite cast iron by…

    本研究在球墨鑄鐵強韌化方面提出了新的強韌化方法。

  • The microstructure of spheroidal graphite cast iron spray -formed has been gained more obvious improvement as compared with that of the spheroidal graphite cast iron prepared by sand c…

    與砂鑄和水平連鑄的球墨鑄鐵組織相比,噴射成形的球墨鑄鐵組織得到大大改善。

  • The surface induction quenching test on gray iron and spheroidal graphite cast iron indicated that the equipment was easy to operate, and had strong stability, it was provided with practicality value.

    通過對灰口鑄鐵和球墨鑄鐵材料的表面感應淬火工藝的試驗,證實該設備操作簡便、穩定性強,具有很高的實用價值;

  • NOTE The transmission technique has insufficient sensitiity to detect the discontinuities found in spheroidal graphite cast iron castings and is used in exceptional cases only.

    注意:在球鐵鑄件的鑄造中,(超聲波的)發射技術對于檢測非連續的鑄造是不夠準确的,隻有在例外的情況下才使用。

  • This paper conducts a research on the influence on the mechanical propeerties of spheroidal graphite cast iron by changing th…

    本研究在球墨鑄鐵強韌化方面提出了新的強韌化方法。

  • The torsional strength of the notch of spheroidal graphite (SG) cast iron by continuous casting was tested.

    研究了一種用水平連鑄技術生産的球墨鑄鐵型材的扭轉強度和缺口扭轉強度。

  • English Name:Rough castings of cast iron with spheroidal graphite - General tolerances, machining allowances; inactive for new design.

    簡體中文标題:球墨鑄鐵毛坯鑄件。一般公差及機加工餘量。不適用于新設計。

  • The influence of flake and spheroidal graphite on oxyacetylene cutting characteristic of cast iron has been analysed.

    讨論了石墨的物理性能,分析了片狀和球狀石墨聚集狀态對鑄鐵氣割性的影響。

  • All the engine casings are to my design, cast by a local commercial foundry in spheroidal graphite iron, (a ductile grade and beautiful to machine!

    所有的發動機外殼是我的設計,由當地的球墨鑄鐵鑄造廠鑄造,(1韌性等級和美麗的機器!)

  • The effects of carbon content on microstructure and mechanical properties of spheroidal graphite cast iron containing arsenic, tin, lead and titanium was investigated.

    研究了碳量對含砷錫鉛钛球墨鑄鐵組織與力學性能的影響。

  • NOTE The transmission technique has insufficient sensitivity to detect the discontinuities found in spheroidal graphite cast iron castings and is used in exceptional cases only.

    注意:對于檢測球墨鑄鐵中的缺陷來說,穿透技術的靈敏度不夠,隻有在特殊情況下使用該技術。

  • A homogeneous weld electrode was developed for welding spheroidal graphite cast iron.

    采用該焊條對球墨鑄鐵焊接時,可以達到同質焊縫要求。

  • Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.

    分别以球墨鑄鐵和石墨為原料,采用機械球磨法成功制備了碳微球。

  • In this paper, the mathematical and physical model was developed based on the thermodynamics and solidification theory before the eutectoid transformation of spheroidal graphite cast iron occurred.

    基于球墨鑄鐵發生固态相變之前的熱動力學和凝固原理建立了數值模拟的物理數學模型。

  • This paper introduced that horizontal centrifugal casting technology is used to develop the composite acicular spheroidal graphite cast iron collar for tension reducing mill of Baogang pipe mill.

    介紹了采用卧式離心鑄造技術,試制寶鋼鋼管軋機使用的複合針狀球鐵張減機輥環的過程。

  • Effects of the amount of C. Cr. inoculation agent. samples size and heat treatment on properties of wear-resistant martensitic spheroidal graphite cast iron containing carbide are researched.

    研究了碳量、鉻量、孕育量、試樣尺寸及熱處理工藝對含碳化物馬氏體抗磨球墨鑄鐵性能的影響。

  • In the case of spheroidal graphite cast iron with ferrite-bainite matrix, the crack would propagate mainly in ferrite and secondary graphite .

    裂紋在鐵素體-下貝氏體中時以在鐵素體中的擴展為主。

  • On the basis of solidification kinetics, the mathematical model of microstructure formation formation of spheroidal graphite cast iron is established, improved and verified with the sample castings.

    根據凝固動力學理論,建立和完善了球墨凝固過程中各階段組織形成的數學模型。

  • The experimental result in this paper shows that the theory of elastic-plastic mechanics can be basically applied to spheroidal graphite cast iron with the matrix of ferritic-pearlitic.

    本文的實驗結果表明,彈塑性力學的理論和假設基本適用于鐵素體-球光體基體的球墨鑄鐵材料。

  • 同義詞

  • |nodular cast iron/nodular iron/ductile cast iron;[材]球墨鑄鐵

  • 專業解析

    球墨鑄鐵(Spheroidal Graphite Cast Iron),又稱球鐵或SG鑄鐵,是一種特殊類型的鑄鐵材料。其核心特征在于其内部石墨(碳的一種存在形式)呈球狀或近球狀,而非普通灰鑄鐵中的片狀石墨。這種獨特的微觀結構賦予了它優異的綜合性能。

    1. 核心特征與名稱來源:

      • "Spheroidal Graphite"(球狀石墨): 這是區别于其他鑄鐵的關鍵。通過在熔融鐵水中添加球化劑(通常是鎂、铈或稀土元素),石墨在凝固過程中以球狀或團狀形态析出,而非形成削弱基體的片狀。這種球狀形态顯著減少了石墨對金屬基體的切割效應。
      • "Cast Iron"(鑄鐵): 指明這種材料是通過鑄造工藝(将熔融金屬澆注到模具中成型)生産的鐵碳合金。其碳含量(通常在2%至4%之間)高于鋼,使其具有良好的鑄造流動性。
    2. 組織與性能優勢:

      • 球墨鑄鐵的基體組織(包圍着球狀石墨的金屬部分)可以是鐵素體、珠光體、貝氏體或馬氏體,或者它們的混合組織,這取決于熱處理工藝。這使得其性能可以在很大範圍内調整。
      • 優異的機械性能: 球狀石墨大大減少了應力集中,使得球墨鑄鐵同時具備接近鑄鋼的高強度、良好的塑性和韌性,其屈服強度甚至高于許多碳鋼。這是它相對于脆性較大的普通灰鑄鐵(片狀石墨)的最大優勢。
      • 良好的鑄造性能: 繼承了鑄鐵良好的流動性和較低的收縮率,適合制造形狀複雜的鑄件。
      • 良好的加工性能: 相比普通灰鑄鐵,其加工性能通常更好。
      • 良好的耐磨性和減震性: 保留了鑄鐵固有的耐磨性和吸震能力。
      • 成本效益: 與鑄鋼相比,球墨鑄鐵的熔煉溫度較低,加工性能更好,通常具有更低的制造成本。
    3. 應用領域:

      • 球墨鑄鐵因其強度、韌性和成本效益,被廣泛應用于對性能要求較高的領域,例如:
        • 汽車工業:曲軸、凸輪軸、差速器殼體、輪毂、轉向節。
        • 管道系統:輸水、輸氣管道(耐壓性好)。
        • 重型機械:齒輪、機架、液壓閥體。
        • 農業機械:齒輪箱、犁铧。
        • 能源領域:風力發電機部件、大型齒輪箱。
        • 建築五金:管件、閥門。

    權威性參考來源:

    網絡擴展資料

    spheroidal graphite cast iron(球墨鑄鐵)是一種鑄鐵材料,其名稱來源于内部石墨的球狀形态結構。以下是詳細解釋:

    1.基本定義與命名

    2.性能優勢

    3.常見類型

    4.應用領域

    5.與其他材料的區别

    如需進一步了解生産工藝或具體牌號,可參考材料工程專業文獻或标準(如ISO 1083)。

    别人正在浏覽的英文單詞...

    【别人正在浏覽】