
[光][電訊] 抛物面反射器
The surface of the parabolic reflector antenna is the most important part in receiving microwave signal.
微波反射面是進行微波接收的重要工作面,其形狀主要是抛物面或者抛物面的一部分。
The radiant cooler used in the sun synchronous orbit is always designed two stages with a W-shaped parabolic reflector.
在太陽同步軌道衛星上應用的輻射制冷器都采用兩級抛物面w型的結構形式。
Array-fed parabolic reflector and shaped reflector with a single feed are usually used to be contoured beam satellite antenna.
衛星波束賦形天線普遍采用陣饋抛物反射面天線和單饋成形皮射面天線。
It features a parabolic reflector that rotates around an incandescent lamp, providing 60 flashes per minute in all directions.
采用抛物面反射器,圍繞白熾燈旋轉,每分鐘60次閃光,閃光全面。
Compared with the parabolic reflector, a phase factor is of most importance in the efficiency evaluation of Fresnel zone phase-corrected plate (FZP) ones.
同抛物面反射器相比,菲涅爾區相位修正平面反射器的相位效率因子對天線效率的影響顯著。
抛物面反射器(parabolic reflector)是一種基于幾何抛物面設計的裝置,主要用于定向反射或聚焦電磁波、光波等能量形式。其核心原理是利用抛物面的獨特幾何特性:所有入射到抛物面且與軸線平行的射線,經反射後會彙聚于焦點;反之,從焦點發出的射線經反射後則形成平行波束。這一特性使其在多個工程領域具有關鍵應用價值。
抛物面反射器的表面通常由金屬或鍍膜材料構成,形狀符合數學抛物面方程:
$$
z = frac{1}{4f}x
$$
其中,(f)為焦點到頂點的距離。根據《光學工程基礎》(Fundamentals of Optical Engineering),這種結構能有效消除球面像差,實現能量高效集中。
相比平面或球面反射器,抛物面結構在波前控制精度和能量利用率方面表現更優。IEEE天線與傳播期刊(IEEE Transactions on Antennas and Propagation)的研究表明,其方向性增益可提升30%以上。
Parabolic Reflector(抛物面反射器)是一種基于抛物線幾何形狀設計的反射裝置,主要用于聚焦或平行光/電磁波束。以下是詳細解釋:
如需更全面的技術參數或應用案例,可參考光學工程或天線設計領域的專業文獻。
nationalmarkinterestedfascinatingin charge ofcalm downpalmbelovedconsoleutterancedeploreyowlpampersruminationat one fell swoopcommence businessfloor slabhair transplantationinfrared receivernegotiable instrumentpeg downtriangular matrixcobancockneyismcystoblastEhrlichiaetoxinolhereditablehypochromialiptobiolith