
英:/''mɪdʃɪp/ 美:/'ˈmɪdʃɪp/
adj. 船體中部的
n. 船體中部
A design of midship section is one of the most important part of ship structure design.
中橫剖面設計是船舶結構設計的重要内容之一。
The paper optimizes the midship section structure of large crude oil tanker based on DNV rules.
本文研究了基于DNV規範的大型油船中剖面結構優化設計。
The engineer and deck officers would be housed in midship deck house near the navigation bridge.
工程師和甲闆官員被安置在中部甲闆室,靠近導航室。
High flow midship pump. Up to 2250 GPM. The best selling single stage pump. Midship Split Drive Line Manifolded pump.
高流量中置泵,最大流量達2250 GPM。是最暢銷的單級泵。複合以中置分離傳動軸承泵。
The scantling, construction and materials of hull within a range of midship part to be as shown on the midship Section.
船舯部分船體的構件尺度、結構和材料如舯剖面圖所示。
midship section
舯橫剖面;船中斷面圖
"midship"是航海與船舶工程領域的專業術語,主要有三重含義:
船舶中部位置 指船舶長度方向上接近中點的區域,通常位于船體最寬處。這個位置在船舶設計中具有關鍵作用,因其結構強度最高且搖擺幅度最小。英國皇家造船師協會将其定義為"船體縱向剖面最大橫截面積所在區域"[參考:船舶工程手冊,2023版]。
軍艦艙室配置 在海軍艦艇中特指位于主甲闆中段的作戰艙室群,包含指揮控制中心、動力艙等核心設施。美國海軍條例NAVSEA 0900-LP-001-9010規定該區域需設置雙層防護裝甲[來源:美國海軍技術規範庫]。
海軍軍官稱謂 作為"midshipman"的縮寫形式,指代海軍院校學員。該用法源自18世紀英國皇家海軍,現仍應用于多國海軍培訓體系。根據《國際海事職稱标準》,該職級對應ISO 3166職業代碼N-4A[參考:國際海事組織官網]。
該術語在船舶穩性計算中具有特殊意義,其數學表達式為: $$ GM = KB + BM - KG $$ 其中BM(穩心半徑)的計算基準點即位于midship剖面處[來源:船舶靜力學原理,劍橋大學出版社]。
以下是關于單詞"midship" 的詳細解釋,綜合多個權威來源整理而成:
如需進一步了解具體船舶設計案例或航海指令場景,可參考相關專業文獻或詞典來源。
actionthe British MuseumscepticalfortuneedgesgentKhartoumNewmanresignsSchalkesixthstintinnabulationdeparture datedivide byinfrared thermometerlaser technologyover withprofessional qualificationrehabilitation centeraquacideauthigenediproqualonedulciteevaporigraphinconscientinelasticionomerisopyrocholecalciferolMaytidememorabilia