
adj. 等軸的
The fine equiaxial microstructure can obtain better mechanical properties.
變形獲得的細等軸組織能得到較優的力學性能。
Segregated solutes and inclusions are distributed at the transition boundary of the column crystal and the equiaxial crystal.
在柱狀晶與等軸晶過渡區中存在着偏聚物。
The fracture toughness of lamellar microstructure is higher than that of equiaxial microstructure when deformed above the phase transition.
相變點以上得到片層組織,片狀組織的斷裂韌性高于等軸組織。
It was shown that after the ZA alloy was processed by TIG welding, the weld seam consists mainly of columnar dendrites and a small amount of equiaxial crystals;
結果顯示,新型模具ZA合金用TIG方法進行焊接,焊縫組織形态主要是柱狀樹枝晶和少量的等軸晶;
Equiaxial prestrain will obviously decrease the forming limit on positive strain ratio zone, while it slightly improves the forming limit on negative strain ratio zone.
等雙拉預應變将明顯降低正應變比區的成形極限,對負應變比區的成形極限有所提高。
adj.|isodiametric;等軸的
在材料科學與工程學領域,equiaxial(等軸)指材料微觀結構中晶粒在各個空間方向上具有相近尺寸的特性。該術語由前綴"equi-"(相等)和"axial"(軸向)構成,常見于金屬、陶瓷等結晶材料的金相分析中。
等軸晶粒表現為三維空間中近似球狀或立方狀的形态,晶粒長寬比接近1:1。這種結構常見于完全再結晶的金屬材料,例如經過適當退火處理的低碳鋼,其晶界能量分布均勻,各向異性較弱(ASM International《Metallography and Microstructures》)。
掃描電子顯微鏡(SEM)和電子背散射衍射(EBSD)是主要檢測手段,通過晶界取向差測量可量化晶粒尺寸分布。美國材料試驗協會标準ASTM E112規定:當晶粒長軸與短軸尺寸差異≤10%時可判定為等軸晶。
“Equiaxial” 是一個材料科學和冶金學領域的術語,通常用于描述晶體或晶粒的形态特征。該詞由前綴“equi-”(意為“相等”)和“axial”(與“軸”相關)組成,整體含義為“各軸向尺寸相等”,即物體在多個方向上的長度或尺寸相近。
基本定義
在微觀結構中,若晶體或晶粒在不同方向(如長度、寬度、高度)上的尺寸接近,則稱為“equiaxial”(等軸)。這種結構常見于金屬或合金的退火态,表現為近似球狀或多面體形态。
應用場景
對比概念
與“柱狀晶”(沿某一方向伸長)或“片狀晶”(扁平形态)相反,等軸結構無顯著方向性差異。
若需進一步了解具體材料(如等軸鐵素體)的性能或形成機制,建議參考材料學專業文獻或權威教材。
irrespectivelay sth onreceivablecleanhandeddestructuralizelynchingmessagesnephewsoverweightedPartingtonrimmingunpopulatedvincristindiamond necklacefamily Biblehead hunterveterinary stationvibrating screenanamesiteantivitaminbiospectroscopycockneydomDHCPeinsteiniumexteriorizationhomochronousinterstratifiedmartingaleleukocytomamelodica