
循環應力;周期應力
With the increase of cyclic stress ratio, the pore water pressure rate increases.
隨着循環應力比的增加,孔壓率增加。
The random cyclic stress-strain responses are found and its probabilistic model is established.
新發現隨機循環應力—應變響應現象并建立其概率模型。
But steel alloys subjected to cyclic stress levels below their endurance limit rarely fail as a result of fatigue.
但是在鋼鐵合金的耐用度限制下,作為疲勞的結果,它們經受周期壓力級别很少失靈。
It also can be observed that the dynamic strength decreases significantly as radial cyclic stress ratio increases.
隨着徑向循環應力比的增加,土體的動強度降低。
The results show that low cycle fatigue life is reduced and cyclic stress is raised by torsional prestrain raising.
結果表明,扭轉預應變降低低周疲勞壽命,循環應力隨扭轉預應變的增大而增大。
"Cyclic stress"(循環應力)是材料科學和工程力學中的專業術語,指材料或結構在反複加載和卸載過程中承受的周期性應力。這種應力會導緻材料内部逐漸産生微裂紋,最終引發疲勞失效。例如,飛機起落架在每次起降時都會經曆循環應力作用,長期累積可能造成金屬疲勞斷裂(來源:美國材料試驗協會 ASTM E1823 标準)。
在工程實踐中,循環應力的特性包括:
目前國際通用的循環應力測試标準ISO 12107規定,測試需在控制溫度、頻率和應力比的條件下進行,以準确評估材料抗疲勞性能(來源:國際标準化組織技術報告)。
“Cyclic stress”是材料科學和工程力學中的專業術語,指隨時間或載荷周期性變化的應力。以下是詳細解析:
詞義構成
專業定義 在工程領域,cyclic stress特指材料或結構在重複加載-卸載過程中承受的交替變化應力。例如機械部件旋轉時承受的交變載荷。
典型應用場景
相關參數 常用指标包括應力幅(Stress amplitude)、平均應力(Mean stress)和應力比(R ratio),其數學表達式為: $$ sigmaa = frac{sigma{max} - sigma{min}}{2} $$ 其中$sigma{max}$和$sigma_{min}$分别表示周期内最大/最小應力值。
建議參考《材料力學》或ASTM E606标準獲取更詳細的實驗方法和數據分析規範。
hungerblindnesswith the help offirewoodutmostscrollheinousrostrumalkaloidsatresiabudgetsgassedgladdedgranulationgyrationhieroglyphicsreopenbamboo basketmathematical formulaprice fluctuationseries capacitoradmiralshipApodibioptixcyclopianecclesiologyexhalitefilatehexadecanejardiniere