耐压试验
The series tuning device fOr the power-frequency withstand voltage test is introduced. The characteristics of the device are analyzed. The conclusion is given.
介绍了变压器工频耐压试验的串联调谐装置，对其性能和特性进行了分析，给出了结论。
Using computer control, man-machine dialogue mode, the completion of the power frequency voltage breakdown of insulation media, power frequency withstand voltage test.
采用计算机控制，过人机对话方式，完成对、绝缘介质的工频电压击穿，工频耐压试验。
The HVDC withstand voltage test can discover the defect of paper insulated cable efficiently, but it has limitation in discovering the defect of cross-linked polyethylene insulated power cable.
分析了高电压直流耐压试验可有效发现纸绝缘电缆缺陷，但在发现交联聚乙烯绝缘电力电缆缺陷方面有局限性。
The principle and working process of a FM serial resonance device was introduced and its application no AC withstand voltage test of high voltage XLPE insulated cable was also discussed.
介绍一种调频串联谐振装置的原理及工作过程，并在高压交联聚乙烯（XLPE）绝缘电缆交流耐压试验中应用。
For the establishment and execution of new state detection criterion, this paper introduces a withstand voltage test system which corresponds to the standard of IEC61010.
为了配合仪器设备电气安全性能检测新国标的制定和实施，设计了符合IEC61010标准的耐压测试系统。
In order to resolve the pollution flashover problem, the anti pollution design shall be made based on withstand voltage test on real size specimen.
解决污闪问题应在预计污秽度下以其真型试验求取污耐压为基础进行污秽绝缘的设计。
The implementation of leakage current measurement in withstand voltage test at operating temperature for electric appliance safety inspection is presented in this paper.
介绍一种电器安全检验在热态耐压测试中漏电流及其波形检测的实现。
Line frequency withstand voltage test is a test to verify low-voltage appliance's solid insulation and the capacity to withstand short time over-voltage.
通过试验研究了弱电设备电气连线、制电路板及低压系统保险丝管等耐受雷电流的能力。
In the cable service processes, DC withstand voltage test is better than the AC test. The DC withstand voltage is introduced in this paper.
电缆修理过程，直流耐压试验优于交流耐压试验。介绍直流耐压试验特点。
The stator winding of power frequency withstand voltage test.
定子绕组做工频耐压测试。
In addition, the author has established a simulative testing circuit in lab, in order to verify if the system can control the withstand voltage test process or not.
另外，笔者还在实验室建立了模拟试验电路，目的是检验系统能否作到对耐压试验的自动控制。
Based on an analysis of the problems existed in DC voltage withstand test for rubber plastic cable, some methods currently suitable for testing rubber plastic cables are compared.
在分析橡塑电缆直流耐压试验存在问题的基础上，对目前适合的橡塑电缆试验的几种方法进行比较。
The power frequency voltage withstand test and the simulated brushing test show that the robot has great insulating ability and good application prospects.
工频耐压试验和模拟带电清扫试验表明，关节式带电清扫机器人有良好的绝缘性能，并具备了明朗的应用前景。
The Frequency-tuned Series Resonant AC Voltage Withstand Test System has been CIGRE recognized as the best field test system.
调频串联谐振耐压试验系统已被国际大电网会议确认为最优秀的现场试验系统。
By induced over-voltage withstand test, partial discharge test, partial discharge test , dry-type transformer insulation hidden damage can be detected.
例行试验时，基本上都以外施交流耐压来检验变压器的绝缘强度，纵绝缘即使已经发生损坏也检验不出。
The ***lectric voltage-withstand test apparatus shall be in accordance with Clause 16.20.
绝缘体的耐压性能测试设备要能达到第16.20条中所列标准。
The traditional measure method of the power withstand test is to use the voltage meter, ammeter, power analyzer, frequency analyzer etc to measure the waveform and parameters of the power signals.
传统的工频耐压试验是通过电压表，电流表，功率分析仪，频谱分析仪等等来分别测量波形及其各个参数的。
A routine test, basically to test the outside Shi AC Withstand Voltage transformer insulation strength, vertical insulation damage has occurred even if the test is also not.
例行试验时，基本上都以外施交流耐压来检验变压器的绝缘强度，纵绝缘即使已经发生损坏也检验不出。
Test should be carried out to check withstand voltage and thermal stability.
试验要根据电容器耐压和耐热条件进行校核。
This paper describes a method for calculating the voltage distribution in EHV transformer windings during switching impulse withstand test.
本文阐述了一个计算超高压变压器在操作波耐压试验条件下线圈中电压分布的方法。
Lightning current withstand capacity test of electronic equipment wires and fuse links in low voltage power systems is conducted in laboratory.
通过试验研究了弱电设备电气连线、制电路板及低压系统保险丝管等耐受雷电流的能力。
As per the equipment capacity and test equivalence demands, this paper demonstrates the necessity, urgency and feasibility of applying variable-frequency series-resonant voltage withstand tests.
为此，根据设备容量和试验等效性要求，论证采用变频串联谐振耐压试验的必要性、紧迫性和可行性。
|withstand test/pressure testing;耐压试验
耐压测试（Withstand Voltage Test） 是电气安全测试的核心项目之一，用于评估电气设备或其绝缘材料承受高电压而不发生击穿或闪络的能力。其核心目的是验证绝缘系统的可靠性，确保设备在额定工作电压或异常过电压下仍能安全运行，防止触电或火灾风险。
耐压测试广泛应用于：
国际电工委员会（IEC）和各国标准机构制定了详细规范：
注：实际测试需严格遵循设备所属领域的标准规范，并由认证实验室执行以确保结果有效性。
Withstand Voltage Test（耐压测试）是电气工程中用于评估设备或材料绝缘性能的关键测试方法。以下是详细解释：
该测试通过施加高于设备额定工作电压的高压（通常为交流或直流），检测其绝缘层能否在一定时间内承受该电压而不发生击穿或损坏。目的是验证电气安全性和长期可靠性。
耐压测试是保障电气设备安全运行的核心环节，通过模拟极端电压条件验证绝缘性能，广泛应用于制造、质检和维修领域。如需完整标准或测试参数，可参考、5、6的原始来源。
【别人正在浏览】