月沙工具箱
现在位置:月沙工具箱 > 学习工具 > 英语单词大全

illuminance是什么意思,illuminance的意思翻译、用法、同义词、例句

输入单词

illuminance英标

英:/'ɪˈluːmɪnəns/ 美:/'ɪˈluːmɪnəns/

常用词典

  • n. [光] 照度;照明度(等于illumination)

  • 例句

  • The results indicated that because of trees the temperature, humidity, illuminance under trees in the patterns of poplar-crop are different in monoculture.

    研究结果表明: 杨粮间作由于林木的存在,林冠层下农作物面上的温度、湿度、光照强度都不同于单衣经营。

  • Discussion and analysis to the result of measurement of luminescent characteristics of long-afterglow phosphor material under multi-illuminance and multi-stimulation.

    本文对新型长余辉稀土发光材料在不同照度,不同激发时间等多种条件下的发光特性进行了检测,并对检测结果进行了分析讨论。

  • The composition, structure and realization of a real time illuminance monitoring system with a single-chip microcomputer. computer as its main component are presented.

    本文介绍了一个以单片微型计算机为核心的光照度实时监测系统的组成、结构及具体实施措施。

  • Some improper points of system illuminance formula in the optics textbook and optical software have been found and analyzed, and more practical formula have been deduced.

    分析并指出了教科书及光学软件中光学系统照度公式的不恰当地方,推导出了更符合实际的光学系统照度公式。

  • It defines illuminance matrix, average illuminance matrix and deviation illuminance matrix, and a method of computing illuminance based on illuminance matrix is explained.

    定义了照度矩阵、平均照度矩阵、均差照度矩阵和参照度矩阵,并阐述了照度矩阵来计算照度的方法。

  • 同义词

  • n.|intensity of illumination/luminous intensity;[天][光]照度;[电]照明度(等于illumination)

  • 专业解析

    照度(illuminance)是光学与照明工程中的核心物理量,定义为物体表面单位面积接收到的光通量,其国际单位制为勒克斯(lx)。该概念遵循国际照明委员会(CIE)的明确定义:照度表示可见光在特定表面的辐射强度,计算公式为

    $$

    E = frac{Phi}{A}

    $$

    其中,(E)为照度(单位lx),(Φ)是光通量(单位流明lm),(A)为受照面积(单位平方米)。

    根据中国国家标准《GB/T 5700-2008 照明测量方法》,1勒克斯等于1流明的光通量均匀分布在1平方米表面上产生的光照强度。实际应用中,照度是建筑照明设计、摄影布光及工业检测的关键参数。例如,办公室工作台面推荐照度为300-500 lx,而精密电子制造环境需达到1000 lx以上。

    国际标准化组织(ISO)在《ISO 8995-1:2022 室内工作场所照明》中进一步规定了不同场景的照度阈值,强调其与视觉舒适度的直接关联。

    网络扩展资料

    光照度(Illuminance)是光学中的一个物理量,用于描述物体表面单位面积接收到的可见光通量。以下是详细解释:


    1.定义与公式

    光照度(符号:( E ))的数学定义为: $$ E = frac{Phi}{A} $$ 其中:

    因此,光照度的国际单位是勒克斯(lx),即 ( 1 , text{lx} = 1 , text{lm/m²} )。


    2.与相关术语的区分

    关键区别:光照度描述“被照物接收多少光”,而亮度描述“光源或表面看起来多亮”。


    3.实际应用


    4.单位换算


    5.测量工具

    常用照度计 直接测量环境的光照度值,其原理是通过光敏传感器将光信号转换为电信号并计算。


    光照度的概念在工程、物理、设计等领域至关重要,合理控制光照度可优化视觉舒适度并节约能源。

    别人正在浏览的英文单词...

    【别人正在浏览】