含铁体不锈钢
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
Aiming at super ferrite stainless steel, the effects of alloy elements are systematically introduced and the instances of its smelting process, application and development are also presented.
本文介绍了铁素体不锈钢的主要缺陷以及为克服这些不足所进行的研究，根据这些研究和冶炼工艺的进步，确定了超纯铁素体不锈钢发展的必然性。
Structure of the automotive exhaust system and its special requirements for materials are described. The development process of the company's 409 ferrite stainless steel (FSS) is introduced.
描述汽车排气系统的结构及其对材料的特殊要求，介绍不锈钢分公司409型铁素体不锈钢的开发过程。
SUS430 is one of ferrite stainless steel grades.
SUS430是铁素体不锈钢钢种之一。
Welding ferrite stainless steel 1.4003 should strictly control the heat input to avoid overheating zone appearing large ferrite grain.
在焊接1.4003铁素体不锈钢时，应严格控制热输入量，避免过热区出现粗大的铁素体晶粒。
The heat exchanger of welded ferrite stainless steel pipe with very low carbon content is used mainly in petrochemical apparatus in stress corrosion environment.
本发明一种超低碳铁素体不锈钢焊接钢管的换热器，主要应用于石化装置中有应力腐蚀危害的环境。
Effect of rare earth on impact toughness of 430 ferrite stainless steel at -20, 0, 20℃ has been stu***d by metallographic examination and SEM, electron spectroscopy.
采用金相、扫描电镜和能谱等分析手段，研究了微量稀土对430铁素体不锈钢在室温和低温下的横向冲击性能影响。
Because the high temperature strength of the ferrite stainless steel is low, the breadth of the slab made from the vertical-arc continuous casting machine do not reach tolerance.
铁素体不锈钢由于高温强度低，直弧型连铸机生产的板坯宽度尺寸难以满足公差要求。
This is to study the reasons why water leakage failure is caused by 4-way reversing valves-ferrite stainless steel bars.
[目的]找出空调四通换向阀产品封头-铁素体不锈钢棒材开裂失效的原因。
Precipitation behavior of antibacterial phase in copper-bearing ferrite antibacterial stainless steel;
研究了铁素体和奥氏体含铜抗菌不锈钢的抗菌特性及相关机制。
Introducing overall the three major methods of measuring ferrite content in austenitic and duplex stainless steel, it is chemical analysis-diagram method, metallographic method and magnetic method.
全面介绍了检测奥氏体及双相不锈钢中铁素体含量的三种常用方法：化学分析-图谱法，金相法及磁性法。
Stainless steel layer contains ferrite and Austenite;
不锈钢层组织为铁素体和奥氏体；
Stainless steel layer contains ferrite;
不锈钢层组织为铁素体；
It simply introduced the content control technique for both ferrite and austenite phase in a duplex stainless steel and its corrosion resistance.
本文简要介绍了双相不锈钢的铁素体和奥氏体两相的控制技术及它的耐腐蚀性能。
It mainly introduces the production processes of alloy structural steel welding wires of bainite and martensite and stainless steel welding wires of ferrite, martensite and austenite.
重点介绍了按金相组织分类的贝氏体、马氏体类合金结构钢和铁素体、马氏体、奥氏体类不锈钢合金焊丝的生产工艺。
The influence of aluminum on the content and morphology of ferrite and toughness of chromium-nickel austenitic stainless steel welds is discussed.
本文研究了铬镍奥氏体焊缝中铝对铁素体含量和形态的影响及其与焊缝韧性的关系。
The magnetic drive part is mainly made of ferrite, and overflow part is made of stainless steel. Currently it is the no-leakage pump applied most widely.
磁转动部分采用铁氧体为主要的材料，过流部分采用不锈钢，是目前应用最广泛的无泄漏泵。
铁素体不锈钢（Ferritic Stainless Steel）是一种以体心立方晶体结构的铁素体组织为主的不锈钢类型，其核心特性与成分密切相关。以下是其详细解释：
基本定义与成分特征 铁素体不锈钢的主要合金元素是铬（Cr），含量通常在10.5%至30%之间，这是其具备不锈钢耐腐蚀性的基础。其碳（C）含量非常低（通常低于0.1%），这是区别于马氏体不锈钢的关键点之一。镍（Ni）含量也很低或几乎不含，有时会添加钼（Mo）、铝（Al）、钛（Ti）或铌（Nb）等元素以改善特定性能，如耐蚀性或焊接性。其微观结构在从高温到室温的冷却过程中基本保持铁素体（α-铁）相，不发生显著的相变。
核心特性
主要应用领域 铁素体不锈钢因其成本效益（不含或低镍）、耐蚀性和成型性，广泛应用于：
权威参考资料：
“Ferrite stainless steel”（铁素体不锈钢）是一种以铁素体晶体结构为主的不锈钢类型，以下是详细解释：
总结来看，铁素体不锈钢以高铬、低碳和磁性为特点，适用于成本敏感且需耐腐蚀的场景。如需具体型号或工艺细节，可参考材料科学专业文献或行业标准。
【别人正在浏览】