
[力] 應力腐蝕裂痕
The role of hydrogen embrittlement in stress corrosion cracking has also been discussed.
文中還對氫脆在應力腐蝕開裂中的作用進行了讨論。
Through the discussion on the mechanism and effect factors of the stress corrosion cracking by sulfides, this paper expounds its harmfulness and proposes some measures to control it.
本文通過對硫化物應力腐蝕開裂的機理和影響因素的讨論,說明其危害性并提出了控制方法。
It has been proved that these cracks are caused by sulfide stress corrosion cracking(SSCC) through failure analysis and service environment survey.
通過失效分析和管道服役環境調查,證明開裂原因是管道服役期間發生硫化物應力腐蝕開裂(SSCC)。
Results show that both high temperature quenching and step quenching can apparently increase the stress corrosion cracking resistance K_(ISCC).
結果表明,高溫淬火和分級淬火可使應力腐蝕斷裂撫力K_(ISCC)值得到明顯提高。
The results show that the early failure of the cooling pipe was caused by the stress corrosion cracking in the components.
結果表明,冷卻水管發生早期失效是由于構件發生應力腐蝕開裂所緻。
In this paper, we raise really available measures through the investigation, analysis, test and research about the stress corrosion cracking of pressure vessel for ammonia refrigerating equipments.
通過對氨制冷壓力容器應力腐蝕開裂進行調查、分析、試驗和研究,提出切實可行的對策措施。
The corrosion behavior of 2D12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.
對不同規格2D12鋁合金進行晶間腐蝕、剝蝕和應力腐蝕性能測定。
The examination and analysis reveal that the cracking of the plates is the result of stress corrosion cracking (SCC) caused by polythionic acid.
通過對隔闆的檢查和分析,判斷隔闆斷裂屬于連多硫酸引起的應力腐蝕開裂。
Using the NACE standard bent-beam test, the behavior of sulfide stress corrosion cracking(SSCC) of different microstructures for X70 grade pipeline steel was investigated.
采用三點彎曲法研究了不同組織類型的X70級管線鋼的硫化物應力腐蝕開裂(S SCC)行為。
Accidents of liquid ammonia equipment used in petrochemical industry happen mostly due to stress corrosion cracking.
石油化工用液氨設備事故多數源自液氨應力腐蝕開裂。
Crack and shelling of coatings on underground pipeline is one of the main reasons for pitting corrosion and stress corrosion cracking of the pipeline .
埋地管道的塗覆層因損傷而開裂起翹,是引發其點蝕穿孔和應力腐蝕斷裂的主要原因之一。
It is found that there are solidification cracking within argon arch welding joint between heat exchange pipe and pipe plate and stress corrosion cracking on its surface.
對某台加熱器發生洩漏的部位進行了金相、掃描電鏡檢查,檢查出換熱管與管闆的氩弧焊縫内部存在結晶裂紋且表面存在應力腐蝕裂紋。
Various mechanisms of hydrogen-induced cracking and stress corrosion cracking have been reviewed.
本文對各種氫緻開裂和應力腐蝕機理進行了評述。
The effect of high-temperature pre-precipitation on the microstructure, age hardening and stress corrosion cracking of 7A52 alloy has been investigated.
研究了高溫預析出對7A52合金組織、時效硬化和應力腐蝕斷裂的影響。
It was concluded that the Cl ion in the oil glue resulted in stress corrosion cracking of the pure copper tube.
結果表明,紫銅管滲漏系腐蝕引發裂紋所緻,而塗在銅管表面的油膠中的氯離子是引起紫銅管應力腐蝕開裂的主要因素。
There are some factors which influence the characteristics of initiation and propagation of stress corrosion cracking and corrosion fatigue cracking in high-strength steel in a watery environment.
影響高強度鋼在水介質中的應力腐蝕和腐蝕疲勞裂縫萌生和擴展特性的因素甚多。
Brittle fracture is a stress corrosion cracking phenomenon which occurs in high voltage composite insulators. Previous stu***s all focused on the source of the corrosion medium, e. g. the acid.
脆斷是高電壓複合絕緣子發生的應力腐蝕斷裂現象,國内外的研究基本集中在“腐蝕”介質酸的來源上。
The discrepancies of stress corrosion cracking susceptibility between different types of steel, base matal and welds are analyzed.
材料因素方面主要分析了三種不同種類的鋼以及同一鋼種母材和焊縫的應力腐蝕敏感性的差異。
The stress corrosion cracking(SCC) of carbon steels in aqueous alkali was stu***d by electrochemical technique, stress corrosion test under constant load and repassivation test.
本工作通過電化學,恒載荷應力腐蝕和再鈍化試驗,對碳鋼在堿溶液中的應力腐蝕破裂進行了研究。
A kind of testing machine used to study stress corrosion cracking of materials in natural environment and special environment was introduced, such as toxic atmosphere and corrosion medium.
介紹了一種可以用于研究材料在自然環境及特定環境(如有毒有害氣氛、各種腐蝕介質等)下應力腐蝕性能的便攜式拉伸應力腐蝕試驗裝置。
Stress corrosion cracking problem of concrete beams with crack is stu***d in this paper.
本文研究了帶裂紋混凝土梁的應力腐蝕斷裂問題。
Stress corrosion cracking of an X60 pipeline steel in soil containing water has been investigated using slow strain rate test.
用光滑試樣慢應變速率拉伸法研究了X60管線鋼在含水土壤中的應力腐蝕。
The rupture reasons of tube joint weld of the stainless steel pressure meter are analyzed. It is characteristic of stress corrosion cracking and inter granular fracture.
分析了不鏽鋼壓力表管接頭焊縫開裂的原因,認為此種開裂具有應力腐蝕開裂、沿晶斷裂特征。
Pitting corrosion and crevice corrosion in catalyst deposit zone and corrosion deposit zone can also induce stress corrosion cracking.
催化劑沉積區和腐蝕産物沉積區産生的點蝕和縫隙腐蝕會誘發應力腐蝕開裂的産生。
Stress Corrosion Cracking(應力腐蝕開裂,簡稱SCC) 是指金屬材料在拉應力和特定腐蝕環境共同作用下産生的脆性裂紋現象。這種現象通常發生在高強度或高應力環境中,如橋梁、航空航天器、核電站等工程領域。
必要條件
需同時滿足以下條件:
典型表現
裂紋通常呈分支狀或網狀擴展,無明顯塑性變形,易導緻突發性結構失效。
材料影響
例如矽青銅因抗應力腐蝕性能優于普通黃銅,常用于高壓閥門的閥杆材料。
如需進一步了解具體案例或測試方法,可參考相關工程文獻或行業标準。
這篇文章将詳細解釋三個單詞:stress、corrosion和cracking。
以上是stress、corrosion和cracking的詳細解釋,例句,用法,近義詞和反義詞的介紹。希望能對您有所幫助。
【别人正在浏覽】